English
Currency CNY
Glow in dark pigemnt, glowing pigment,  strontium aluminate glow in dark pigment G106 buy in Hefei
Buy Glow in dark pigemnt, glowing pigment, strontium aluminate glow in dark pigment G106
Glow in dark pigemnt, glowing pigment, strontium aluminate glow in dark pigment G106

Glow in dark pigemnt, glowing pigment, strontium aluminate glow in dark pigment G106

Products from producer
In stock
Wholesale:
  • 45 CNY/kg.  - from 20 kg.
Minimum order cost: 900.00 CNY
Shipping:
Seller
China, Hefei
(View map)
+86( 
Display phones
Technical characteristics
  • BrandMax Glowing
  • ManufacturerMax Glowing Tech Co., Ltd
  • Country of manufactureChina
  • Drying time12 h
  • Special featureLuminescent
  • MGG-10655
Description

Field of application

Suitable for a variety of transparent medium, such as 

  • coating
  • screen printing
  • plastics, coatings
  • powder coating
  • inks
  • enamel
  • leather
  • printing

and other production has good indication and LED products beautifying effect in the dark, luminous pigment. It can be widely used in emergency signs, transfer mode switch, enamel signs, nameplate, nameplate, toys,Leather, handicrafts, clock board, textile.

 

 

  • After absorbing ultraviolet light and other varieties of visible lights,it can glow for more than 12 hours in the dark; 
  • Non-toxic,non-radioactive and harmless;
  • The brightness and afterglow time are more tens times as those traditional zinc sulfide pigment; 
  • Compare to the other photoluminescent pigments on the present market,the most salient characteristic are that they charge light much faster and their afterglow level are also very good; 
  • they have excellent stability and weatherability. The process of excitation and emission can be repeated forever.

 

Application:

  • 1. Luminous paint: Propylene kind, alcoholic acid kind, epoxy resin type of varnish is recommended to use.
  • 2.Coating: Coating has its own coating powder-general phosphor powder, made by special coating treatment.
  • It can prevent the hydrolysis and improve the storage time of the luminous coating.
  • 3.Plastic: Luminous powder can be added in the molding of plastic or light-emitting plastic film panels, light-emitting plastic toys, plastic light-emitting Signs, etc.
  • 4.Also used in ceramics.
  • 5.Mixed with synthetic resin crafts molding.
  • 6.Cosmetics use: glow nail polish.

 

 

 

 

Glow in the Dark Powder Introduction

Photoluminescent powder also called pigment is a new type of environmentally friendly alkaline earth aluminate pigment that is non-toxic and non-radioactive. Pigment particles are charged (excited) by most any visible light or ultraviolet light. Photoluminescent pigments then release energy in the form of visible light (glow in the dark) for 10 to as much as 24 hours. Photoluminescent pigments provide a duty-cycle operation with a very high ratio of glow time to charging time required. The glow intensity (luminosity) and after-glow time are over 30 times greater than traditional ZnS (zinc sulphide) or commonly sold retail store products.

 

Max Glowing can supply luminous pigments with the full range colors and specifications. Our rigorous quality control system ensures that our products have highly stable characteristic and quality. We welcome customized orders manufactured to client specifications.

 

  • Safe for normal uses as it contains no radioactive or toxic materials.
  • Long glow time. Compared with previous photo storage materials, it has up to 30 times longer emission (glow) time.
  • High initial brilliance. Initial luminance of up to 40,000 mcd/m2.
  • High durability. Long shelf life as long as the crystalline structure is not damaged.
  • Outdoor usage. Suitable for outdoor usage as it does not suffer luminance reduction even when placed under a 300 w high-pressure mercury lamp for 1000 hours.
  • Stable Chemical Reaction. Stable as it is resistant to most anhydrous chemicals, both organic and inorganic. However, it will decompose into metal oxide and lose its luminance when brought into contact with water except use our non-soluble (encapsulated or coated) water-based pigment.
  • Temperature Resistance:High Temperatures. The performance and brilliance remain stable under temperature of nearly 1100 degrees Fahrenheit (600C).No decrease in performance even when tested at temperatures of -40 degrees Fahrenheit (-40C). High durability.

Max Glowing Glow products meet various photoluminescent standards and requirements, including:

Glow in the dark/UV pigments are considered to be a non-hazardous substance under United States OSHA Standard 29 CFR 1910.1200.

Glow in the dark/UV pigments meet and exceed compliance (2008-9 testing) with ASTM F963-03 (Standard Consumer Safety Specification on Toy Safety), Section 4.3.5 for heavy metals content, and EN71: Part 3: 1994, amendment A1 2000 for toxic elements content.

 

F&Q

  • What is Photoluminescense?

Lightlead photoluminescent materials (commonly called “glow-in-the-dark”) has the ability to absorb light (sunlight, fluorescent, incandescent,etc) and then to emit light. When ambient darkness occurs, it becomes highly visible, lasting from a few hours to several days days depending on the quality and color.

Upon removal of the light source, the stored light is gradually released, the strongest glow is produced during the first 30 minutes of darkness, the most critical period following a power failure or other emergency. Then it fades over a period of time, when there is light again, it stores energy again. So the photoluminescence process is circulatory.

The bases of most photoluminescent products are photoluminescent pigments that can be incorporated into coat, paint, ink, fabric, ceramic glaze or porcelain enamel, glass, flexible and rigid molded plastics. Typical products include self adhesive flexible vinyl tapes, rigid PVC marker strips, and silk-screened signage. Photoluminescent fabric, enamel-coated sheet metal and ceramic tiles are also available.

  • How bright are these Photoluminescense products?

Many manufacturers refer to the extinction time of their products, which is defined as the time required for the afterglow to diminish to one masb (0.032 mcd/m2, or about 100 times the limit of human perception). In practice, this is very difficult to see unless your eyes are fully dark-adapted and you are in a completely dark environment.

For practical purposes, luminances of one to two millicandela’s per square meter are more appropriate limits for life safety applications, and even this assumes a smoke-free environment. Thus, zinc sulphide products are useful for perhaps 30 to 45 minutes after their excitation source has been extinguished. The afterglow of strontium aluminate products, on the other hand, can be visible for several days or more. All out Max Glowing Glow powder is strontium aluminate based.

At the other end of the time scale, strontium aluminate products can provide surprising amounts of initial afterglow. For example, a four-inch square of material held a few inches away from a magazine page can provide enough light to read by, at least for the first minute or so. In addition, micro prismatic retro reflectors and other brightness enhancing techniques can increase the materials luminance by several times.

  • Can Photoluminescent products replace traditional emergency ligthing?

Light lead photoluminescent materials were originally designed to complement existing emergency lighting systems but continuous improvements in luminance performance mean that in certain circumstances high quality photoluminescent products can replace emergency lighting. They can be sited at waist or skirting level so they can still function if the ceiling lights become obscured by smoke. Similarly, life saving appliances and firefighting equipment become more visible and are easily located in an emergency. Some emergency lighting can take up to 15 seconds to activate. In these instances, photoluminesce products will light up immediately.

  • How do the materials work?

Max Glowing Glow photoluminescent materials contain purpose designed inorganic phosphor compounds that are energised in seconds by the ultra violet and blue light wavelength energy that is present in nearly all light sources. This high-energy source is converted into a lower energy source of light. The lower energy light source is yellow-green, the colour most readily perceived by the human eye and as specified by safety signs standards. Max Glowing Glow photoluminescent materials are non-radioactive and non-toxic and provide a strong light source. They are also self-extinguishing, so they carry on working when they are most needed.

  • Is it environmentally friendly?

Light lead photoluminescent materials are non-toxic, non-radioactive and contain no phosphorus or lead, or any other hazardous element or chemical. The term phosphorence is sometimes used to describe luminescence, but light lead photoluminescent materials contain no phosphorus.

Light lead photoluminescent materials differ from reflective materials, which amplify and increase relative brightness when light is applied. Fluorescent materials are quite different from photoluminescent materials. Fluorescent materials (such as the 3M fluorescent work zone film or a "hot pink" tag) actually serve to borrow nearby light energy in nearby wavelengths and concentrate the amount of light returning to the viewer in a certain (for example, day-glow orange) wavelength. Fluorescent films are especially useful in dawn and dusk viewing times, when they appear particularly bright. Light lead photoluminescent materials require prior exposure to a light source in order to glow in the dark.

 

Mixing Instructions For Glowing Pigment

Glow in the dark powder can be used in many applications, mixed with about any medium and be applied at home, work or school. The highlighted links below will direct you to instructions.

Mediums:
Mix our glow in the dark powder with mediums such as resin, epoxy, paint, plastic, glass, ink, nail polish, clay, rubber, cement, silicone, glue, powder coating, spray painting and road paint.

Applications:
Glow in the dark powder and paint can be used for sidewalks, street numbers, coffee tables, countertops, floors, fishing lures, watch dialers, gun sights, halloween costumes, paintings, swimming pools, jewelry, nails, tape, paper, toys, screen printing, ink, bicycles etc.

Locations:
Apply your products or our paint at hospitals, shops, schools, universities, stadiums, mines, hotels, harbors, ships, amusement parks, movie sets, broadway shows, parks, highways, airports, restaurants, retirement homes, night clubs, farms, warehouses and factories. Make your school or workplace safe! Apply a photoluminescent safety exit strategy. The international building code already adopted the idea and such measuremenns by code are now being accepted and law in many states.

Events:
At special events and holiday's for example raves, hunting, halloween, hiking, weddings, parties, glow runs and many other holidays.

Our pigment can be charged, and discharged indefinitely, making them very economical to use. They are the basic ingredient for most glow in the dark products and are used by consumers, businesses, education and government agencies for products, art, scientific purposes, safety and green applications.

 

We are dedicated to provide you warm customer service . Your time and money is valuable and we will do our best to help and support you. Contact us now!

 

Contact the seller
Glow in dark pigemnt, glowing pigment, strontium aluminate glow in dark pigment G106
Glow in dark pigemnt, glowing pigment,  strontium aluminate glow in dark pigment G106
We recommend to see
Shipping method
Compare0
ClearSelected items: 0