Compact Pressurized Solar Water Heater
- Courier
- In detail
Compact Pressurized Solar Water Heater System, which made up of heat pipe vacuum tube, storage water tank, frame, electric pump, controller, etc.
Work Principle:
The vacuum tubes absorb and convert solar energy into thermal energy, and transfer to the central heat pipe via the aluminum fin. The heat pipes have tiny amount of purified water sealed inside at depressurized condition. When heated, the water inside the heat pipes vaporizes at low temperature, the vapor rises to the condenser and heat energy is conducted to water (inside the tank). When vapor is cooled down, and becomes condensate, falling to the bottom of heat pipe. By continuously circulating in this way, heat is carried from outside to the water inside the tank.
Features:
1) Copper heat pipe tube and inner medium for thermal transmission, with a quick startup and super efficiency, heat pipe transfer the heat energy into the storage tank in one direction, There is no need to wait.
2) No water flows into vacuum tubes, system works well with withdrawal of one or several heat pipe vacuum tubes. No worry about being frozen.
3) Super efficiency of insulation with polyurethane foam; No vent with less heat loss as compared to non-pressurized type
4) System withstands pressure more than 6 Bar, can be connected directly with tap water, more safe system and comfortable hot water use.
5) System can be equipped with auxiliary electric booster and intelligent controller for solar heating assistance and automatically system control
6) Simple structure, easy for assembly and installation on different structure
7) Can be used all year round even works well in extremely cold climate
8)Drinking water quality to promote life quality.
9)Temperature preservation can last for 72 hours.
Specifications:
Heat Pipe
VacuumTube |
Spec.(mm) | Φ 47× 1500 Φ 47× 1800
Φ 58× 1800 Φ 58× 2100 |
Tube (pcs) | 12 / 16 / 18 / 20 / 24 / 28 / 30 / 36 | |
Material | 3.3 Borosilicate glass, red copper heat pipe tube, aluminum fin | |
Coating | Three-target Cu/SS-ALN selective coating | |
Water tank | Capacity | 100 ~ 400L |
Inner tank | Food-grade SUS304-2B stainless steel 1.2~1.5mm | |
Insulation | High-density polyurethaneintegrated-foaming 60mm | |
Outer Tank | Color steel 0.5mm | |
Bracket | Spec.(mm) | 1.5mm in thickness |
Material | Stainless steel /aluminum alloy galvanized steel plate | |
Accessories | Stainless screw, Dustproofseal, Plastic pipe holder | |
Optionaldevice | Electrical heater, Intelligent controller, Anod magnesium bar, T& P valve | |
Workpressure | 6 Bar | |
Tilt angle | 25° ~ 50° | |
Hailresistance | 25mm |